Home » Articles posted by Rebecca Mercer

Author Archives: Rebecca Mercer

Stucco Repair – What You Need to Know

stucco repair

Stucco Repair Philadelphia can range from simple caulking to complete remediation. It’s important to solve the underlying problem to prevent moisture penetration and other problems like mold and wood rot.

Use acrylic paintable caulking to seal cracks less than a quarter of an inch wide. Use a cold chisel to open up the bottom of the crack and key in the new stucco for larger cracks.

Stucco is a popular siding choice for homes due to its durability and beauty. However, stucco also can be susceptible to damage. When cracks and holes start appearing on the exterior of your home, it’s important to address them right away before they escalate.

While some stucco damage can be addressed with caulking, other repairs require more extensive work. Depending on the severity of the cracks and damage, you may need to hire a professional for a full repair job. The location of the cracks or holes can also influence the overall cost. If the damaged area is on a second or third story of the house, it will be more expensive to complete the stucco repair because professionals will need ladders and possibly scaffolding to get to the site.

As a general rule, small hairline cracks that don’t exceed 1/8 of an inch can be mended with paintable acrylic caulk. For a more substantial crack, you’ll need to use a stucco patching product. This can be a premixed stucco mix, which is ready to trowel on, or conventional stucco repair mix that needs to be mixed in a wheelbarrow or plastic bucket following the manufacturer’s instructions.

Before beginning the actual patching process, it’s essential to clean the affected area thoroughly. This will ensure that the new stucco patch adheres properly and that any organic materials like dirt or plant growth are removed from the surface of the wall. In addition, it’s important to remove any existing caulking that’s cracked, discolored or peeling from the walls before attempting to patch them.

Water intrusion is a major cause of damage to stucco. Moisture penetration can lead to mold, wood rot and other serious problems. It’s important to inspect the outside of your stucco regularly for moisture issues, such as damp looking stucco after a rainstorm or spots on the stucco that always look wet.

Although stucco resists fire, rot, termite infestations and insect damage better than most other types of siding, it can still be damaged by storms or if the composition of Portland cement, sand and water isn’t properly balanced. If you notice any signs of damage, such as cracks or stains, it’s best to consult a stucco repair specialist for immediate and thorough repair.

Repairing Cracks

Hairline cracks that are less than 1/8 inch wide do not require repair and are a natural part of the plastering process. However, if you notice a crack that is wider than that, it should be addressed. Larger cracks are often the result of seismic changes in foundations, improper base coat curing, or wet mix. These cracks should be addressed as soon as possible so that they do not worsen.

Stucco is a very durable material, but the nature of it means that it can crack over time. Cracks in stucco are not only unsightly, but they can also allow moisture to penetrate the walls and cause mold and mildew problems. To avoid these issues, inspect your stucco annually and have cracks repaired promptly.

To fix small cracks, you can either use a caulking or apply a stucco patching compound. If you decide to use a caulking, choose an elastomeric variety. This type of caulking will allow the area to expand and contract with temperature changes, preventing further cracking. Once the caulking is dry, it should be painted to match your home’s color scheme.

If you are repairing larger cracks, you can use a premixed stucco patching mix. This material can be troweled on with a putty knife and a wire-bristled brush. It is important to use a textured mix so that it matches your existing stucco. You can find these mixes at most construction supply stores and follow the manufacturer’s instructions for application.

Another option is to mesh the cracks and add a light base coat. This will stop the cracks from reappearing but it can be difficult to blend in. It is best to paint the wall after these types of repairs to conceal them.

Finally, you can repair hairline cracks by using a pigmented coating that bridges and seals the cracks. This technique is a good choice if you are not painting the entire wall, or you want the repaired areas to blend in better with the surrounding stucco. You can use concrete paints and stains, mineral paints, lime washes or even a “fog coat” of pigmented cement.

Patching

It is inevitable that cracks will form in your stucco walls, and the best way to prevent their expansion is with a patch. This is a manageable job that many homeowners can do themselves. Stucco cracks are not necessarily a sign of structural failure, but they can open up vulnerabilities to moisture accumulation and pest infestations. Cracks can also be the first indication of a more serious issue, so it’s important to check for other problems.

Before beginning any stucco repairs, make sure the area is dry. If there is standing water in the wall, it’s a good idea to dig it out and make sure that there is no damage or mold behind the surface. Then, remove any dirt or debris that has fallen into the crack. This will prevent the patch from clogging with more dirt and debris once it’s applied.

Once the area is clean, cut a piece of house wrap or felt paper to match the size of the repair hole and secure it with a staple gun. Then, seal around the seam with acrylic exterior caulk. Before applying the patch, lightly brush or vacuum any dirt from the cracks with a wire brush to prevent more dust from getting into the holes. Mix the stucco patch according to the manufacturer’s instructions. Ideally, you should only make as much as you can use in 20 minutes because it dries quickly.

For hairline cracks, use a standard caulking gun to apply a paintable stucco patch caulk to the crack. The caulk contains acrylic additives that help it respond to surrounding expansion and contraction, which will keep the crack from becoming larger. The caulk can be sanded with your finger and is ready to be painted once it dries.

If you are repairing a wider crack or hole, use a first-coat stucco mix that is ready to trowel on. Follow the manufacturer’s directions for mixing in a wheelbarrow or plastic tray, and be sure to include the acrylic bonding agent. Wet the edge of the old stucco to help it adhere to the new patch.

Remediation

Stucco is a popular building material for home exteriors because it’s attractive, energy-efficient, and durable. However, it can be vulnerable to damage from moisture intrusion, especially if you live in an area with high humidity or heavy rains. If you notice signs of stucco damage, it’s important to seek professional remediation to keep the problem from worsening.

There are a few different ways to repair your stucco, depending on the extent of the damage and the cause. If the cracks are small and confined to a few inches, they can usually be repaired with caulking alone. For larger cracks, however, you’ll need to take a more comprehensive approach that requires some extra steps.

First, you’ll need to remove any loose or crumbling stucco from the damaged areas of your house. You can do this by scraping or chiseling away the stucco and exposing the lath (strips of wood that help support the stucco). Once you’ve removed enough stucco to expose the lath, use tin snips to cut away any house wrap or felt paper that may be near the damaged stucco.

Next, you’ll need to prepare the area for patching by cleaning it thoroughly and removing any debris. You’ll also need to mix concrete for your stucco repair, following the manufacturer’s instructions exactly. Once the concrete is mixed, apply it to your stucco, covering all the cracks, holes, and damaged areas. After the concrete dries, paint over it as needed.

Leaking is a major sign that it’s time for a stucco repair. It can be caused by a number of things, including cracked plumbing or water seepage from behind your stucco. Whatever the cause, you should always address it promptly to prevent mold growth and avoid costly repairs in the future.

Stucco repair can seem like a daunting task, but with the right prep work and tools, it’s actually much easier than you think. If you’re not comfortable with doing the full job yourself, you can always contact a trusted stucco contractor for assistance. With the proper care and maintenance, your stucco can last for years without needing replacement.

Signs That You Need a Driveway Repair Contractor

Over 75 million driveways show wear and tear signs. The good news is that most can be renewed with simple repair procedures rather than completely replaced. The first step is deciding whether your driveway needs patching, crack sealing, resurfacing, or more extensive. Several factors determine this.

Paving ContractorA cracked, damaged, or discolored driveway looks bad, detracts from a home’s curb appeal, and can create safety issues for drivers and pedestrians. Hiring a qualified and professional Driveway Repair Charleston SC to perform the necessary repairs is important before things get out of hand.

A driveway crack is fairly common and can be caused by several issues. The best way to repair these cracks is to do so before they become too large and unsightly. If you do decide to repair them yourself, it is best to use a flexible concrete crack filler that will accommodate the slight expansion and contraction of the concrete as temperatures change. Before beginning your crack repair, clean out any debris, plant life or rocks from the cracked areas of the driveway. This will ensure that you can get a smooth, professional-looking repair. It is also important to do your repairs when the weather is warm and dry so that the sealant can set properly.

Small Cracks: The most common cause of cracks is ground movement. This occurs when the gravel or sand under your driveway shifts as it freezes and thaws. This can cause the asphalt to loosen and start cracking. If you notice any small cracks in your driveway, it is a good idea to fill them with a flexible concrete crack filler such as Quikrete’s Advanced Polymer Concrete Crack Sealant. It is important that the cracks are filled before they get too big, or water will seep into them, freeze and expand, causing the cracks to widen.

Control Joints: Your driveway should be built with control joints to help prevent the cracking that occurs in the middle of a concrete slab. If a control joint has widened and separated from the rest of your driveway, it is likely due to age, ground movement or improper construction. This can be a serious problem that could require the removal and replacement of your driveway.

Sun: Over time, the intense heat of the sun will break down the materials within your driveway, causing it to crack as it degrades. This is another reason that it is a good idea to have your driveway inspected regularly.

If you have a lot of deep cracks, jagged cracks or sinking in your driveway, it is probably best to call in a professional for repair or replacement work. These type of problems are usually caused by a lack of proper base material being used in the construction of your driveway, or a build up of pressure that is beyond what the driveway was designed to withstand.

Potholes

Potholes are deep depressions on asphalt driveways, parking lots and roads that can range in size from a few inches to a few feet. They are a common occurrence for homeowners and can cause damage to vehicles as they drive over them. They can also result in tire and alignment problems. While it is not possible to prevent all potholes, if you are proactive and have your driveway inspected regularly, you should be able to catch any small cracks before they turn into potholes. This will help keep your vehicle driving smoothly and avoid costly repairs.

There are a few ways to repair potholes on your own depending on the location and depth of the hole. If you have a large pothole that is in the middle of your driveway, you may want to call a professional. A professional can use a tamper to pound down the edges of the pothole and fill it with an asphalt patch. This will ensure that the pothole is filled and won’t come back over time.

The process to repair a pothole starts by cleaning the area and making sure that it is free of debris, water, vegetation or anything else that will prevent the asphalt patch from adhering to the existing pavement. Once the pothole is cleaned, it is necessary to heat up the surrounding asphalt to soften it. This helps the asphalt to bond with the patch aggregate and makes it last longer.

If you have a small pothole that is close to your vehicle, you can try to fill it yourself by hand. However, it is important to be careful with this because if you don’t fill the pothole correctly, it can worsen over time. It is also important to make sure that you are not removing any of the base of your driveway underneath the surface of the asphalt.

It is difficult to prevent all potholes from forming on your asphalt driveway but if you are proactive and have your driveway repaired as soon as you see a crack, you can minimize the impact that they will have on your vehicle. The best way to prevent potholes is to avoid driving over them when possible. However, if that is not possible, you should slow down when driving over potholes to minimize the damage they cause.

Sinking

One of the worst things that can happen to a driveway is for parts of it to start sinking. Aside from being unsightly, this can also lead to water pooling, structural damage, icy patches and algal growth.

This problem can be caused by a number of different factors. It could be because the underlying soil was not properly compacted and leveled when the driveway was first put in place, or it could be a sign of poor workmanship. This is particularly common in new developments, where the land hasn’t had a chance to settle and stabilize.

Erosion is another common cause of sunken driveways, especially in our area. Heavy rainfall, flash flooding, freezing and thawing cycles and frequent moisture can cause the ground to shift under a driveway, creating low spots that can sink over time. The good news is that this problem can be avoided by taking preventative measures, such as regular maintenance and the use of a high-quality sealant.

If you do notice your driveway starting to sink, it’s best to contact a professional as soon as possible to avoid further damage. One option is to try mudjacking, which involves drilling holes into the concrete and pumping mud through them to raise the sunken sections. However, this method is messy and doesn’t address the underlying problems with the soil, so the sinking will likely return at some point.

Another option is to resurface the driveway. This is typically more expensive than mudjacking, but it can be much faster and more effective. However, resurfacing isn’t always the best solution, as it will only mask the underlying issues and may be more susceptible to cracking and potholes.

Sometimes the only solution is to dig up and replace the affected section of your driveway. This can be very costly, but it is often the only way to get the job done right. It is important to work with a reliable contractor who will take the time to understand your unique situation and recommend the most cost-effective and long-lasting solution. A good contractor will be able to advise you on the best approach based on the type of drainage and soil composition in your area.

Damage

Over time, driveways take a beating from weather extremes, heavy vehicles passing over them and spills like oil that can leave ugly stains. All of this can cause damage to the concrete, and if left untreated it can lead to larger cracks, holes, sinking or crumbling of the surface. These are signs that it’s time to call a driveway repair contractor.

Driveway repair costs can vary depending on the extent of the damage and any additional services that may be required. For example, if there are drainage problems under the surface such as standing water or washout of soil and sand that is causing cracks and sinking, these will need to be addressed first before repairs can be made. This can significantly increase the cost of the project.

When it comes to driveway repair, a homeowner should always shop around to find the best price for the job. Different contractors will offer different approaches and methods to the work, and will have their own schedules for how quickly they can complete the job. If there are several homes in a neighborhood that require similar services, homeowners can often arrange to have the work done together and benefit from a group discount.

Lastly, before hiring a contractor for a driveway repair project, homeowners should check with their town’s building department to see if they will need a permit to work on the property. Especially if the work is going to involve changing the layout of a sidewalk, curb or gutter, this step is often needed to ensure that the project complies with local regulations and can be completed without any legal trouble.

While it’s never pleasant to spend money on a home improvement project, it’s usually worth the investment to ensure that the driveway is safe and secure for pedestrians and vehicles and that the property maintains its value. Putting off this type of work will only lead to more expensive, and potentially dangerous, repair jobs down the road.